STRICTLY!!!!... blah zombie car blah blah, Cassius Red gas cap

I used McKinney motormounts with 1/4" spacers on th engine. Custom longtube headers, and the starter solenoid was relocated off the starter to the LH engine mount with a small linkage arm. ECU is reflashed with NATS disabled so all I need is basic wiring and no extra modules to get it all running. AC uses all factory wiring with some mild adjustments to the wires that run to the factory ecu, PS uses custom lines and it all works perfect. Stack display shows speed, tach, temps, pressures, factory display shows basic lights and functions. The display is mounted inside the factory cluster.